![]() Your raw files are monochromatic because you used a 720nm filter. Longer wavelength filters, such as 850nm or 950nm, are likely to be "more" monochromatic. The subtle color effects some people get with 720nm filters comes from the quality of the IR filter. Lower quality IR filters let more visible light through, creating false colors. Other points to consider for near-infrared photography: The camera could be damaged. This is unlikely if your camera works as expected for visible light. Based on examination of your raw files, your camera seems to be working appropriately. You could have a poor-quality infrared filter. Based on examination of your raw files, the filter appears to be fine. It should not hinder your ability to process the raw files. Your camera may not be able to handle white balance for IR. This is very likely because most cameras have this problem. This issue affects your ability to preview images in the field and your post-processing workflow. Your camera settings may not be optimal for IR. You may need to use a different metering setting, add exposure compensation, or even use full manual mode. Since camera settings for IR tend to be idiosyncratic, you will need to experiment. Other possible causes that do not necessarily apply to your situation include: Here is a 100% crop to compare the RGB channels to show the difference in noise among the channels. Note that other cameras, because of the Bayer filter, may have different noise characteristics across the channels. RGB curves to visually "normalize" histogram.Īfter exporting the image, you can make further adjustments in an image editor, such as GIMP. In this case, I extracted the red channel because it has much more detail and less noise than the other channels. There is no significant color information in this image, so there is no benefit to keep the other channels.Increase exposure compensation to 5.5. (Consider increasing EV when taking IR photos.) Leon demonstrates this to likely be the case. I used RawTherapee to process one of your images. The following settings are particularly relevant:Ĭolor management must be turned off because it is unable to handle IR correctly. You need to tweak settings when processing RAW files. The most likely cause and solution to your problem is: Terribly sorry for the broadness of my questions, but I still lack the vocabulary to express myself better. On other photos I see, trees look white or pinkish, but the buildings do not.Ĭould it be that I simply somehow damaged the sensor so everything appears too bright? How come even on the best of my photos, if it's blueish - everything is equally blueish, or if it's reddish - everything is reddish (see the linked samples). I've uploaded a couple of RAW samples and would be endlessly grateful to anyone who'd be able to give me any pointer at all about what I am doing so deeply wrong. I know I can't expect too much from the cheap old camera I got, but it should be able to produce something usable, at least according to other experiences I find online. I've tried what I feel is every combination of ISO, F and shutter speed with different, but all equally terrible results. ![]() ![]() ![]() Now, for some reason, all my photos end up either horrendously overexposed but with at least some information in them, or total garbage with literally no information in the photo. I got an old Sigma SD14 because it doesn't require conversion, as the internal filter can be simply popped out. I decided to try experimenting with something cheap to see if I have any hope in this hobby or not. I'm very new to photography and got attracted to the infrared photos I keep seeing online. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |